Halo Micro HL5095 USB-C port protection IC
The HL5095 is a slew-rate controlled, low Rds(on) over-voltage protection device. It is used in between a power source and a load to protect and isolate power source against unwanted abnormal voltage and current condition. Especially, in the OTG mode of smartphones, the HL5095 could be placed between OTG boost regulator and USB port. The HL5095 can protect boost regulator from over-voltage or over-current USB conditions in smartphones.
Part no.: HL5095
Key features
- Input voltage range: HL5095A: 2.5-13.5V HL5095B: 2.5-10V HL5095C: 2.5-5.5V
- 28V Absolute maximum voltage rating of VOUT
- Adjustable current limit with external resistor
- Integrated power FET switch with 53mΩ Rds(on) @ 5V/1A
- Built-in soft start to prevent inrush current Protections
- Over-temperature protection (OTP)
- Over-voltage protection (OVP): HL5095A: 14.2V HL5095B: 10.4V HL5095C: 5.8V
- Over-current protection
- Reverse current protection
- Compliance to IEC61000-4-2 on VOUT
- Contact discharge: ±8kV
- Air gap discharge: ±15kV
- Package: HL5095A, HL5095B, HL5095C: 9-bump WLCSP, 0.4mm pitch,1.23mm x 1.23mm
Applications
- Consumer Electronics
- Smart Wearables
Industries
Halo Micro HL5095 USB-C port protection IC datasheet
Halo Micro HL5095 USB-C port protection IC datasheet
